kaizenlab-quality

Accredia

For further information about the accreditation, visit the official page of Accredia –  click here

 

List of ISO 17025 accredited tests (November 2019 – Revision 8):

  • Chemical analysis of carbon steels – ASTM E415-17
  • Detecting susceptibility to intergranular attack in austenitic stainless steels – ASTM A262-15 practice B,C,E, ; UNI EN ISO 3651-1:2000; UNI EN ISO 3651-2:2000
  • Chemical analysis on austenitic steels – ASTM E1086-14
  • Chemical analysis on Duplex stainless steels – Metodo interno PT_26 Rev.3 2018
  • Detecting detrimental intermetallic phase in duplex austenitic/ferritic stainless steels – ASTM A923-14 met. A,C
  • Pitting and crevice corrosion resistance of stainless steels and related alloys by use of ferric chloride solution – ASTM G48-11 (2015) met. A
  • Chemical analysis of ferritic/martensitic stainless steels – Metodo interno PT_26 Rev.3 2018
  • Detecting susceptibility to intergranular corrosion in wrought, nickel rich, chromium-bearing alloys – ASTM G28-02 (2015) met. A
  • Determining the inclusion content of steel – ISO 4967:2013; ASTM E45-18a met. A – D
  • Determining average grain size (comparison procedure) – UNI EN ISO 643:2013 (par.7.1.2); ASTM E112-13 (par.10)
  • Macroscopic examinaton – ASTM A604/A604M-07 (2017); ASTM E340-15; ASTM E381-17; UNI 3138:1984
  • Microscopic examination – UNI 3137:1965; ASTM E3-11(2017)
  • Brinell hardness test (HBW 2,5/187,5) – UNI EN ISO 6506-1:2015; ASTM E10-18 (par.5.7 excluded); ASTM A370-19
  • Rockwell hardness test (HRB, HRC) – UNI EN ISO 6508-1:2016; ASTM E18-19 (par.5.8 excluded); ASTM A370-19
  • Vickers hardness test Vickers (HV10, HV30) – UNI EN ISO 6507-1:2018, ASTM E92-17
  • Bend test (0-180°) – ISO 7438:2016; ASTM E290-14; ASTM A370-19
  • Impact test (up to 450J) – UNI EN ISO 148-1:2016; ASTM E23-18; ASTM A370-19
  • Tensile test (up to 250 KN) – UNI EN ISO 6892-1:2016; ASTM E8/E8M-16a; ASTM A370-19
  • Hot tensile test (up to 250 KN; from 50°C up to 550°C) – UNI EN ISO 6892-2:2018; ASTM E21-17e1
  • Determining the inclusion or Second-Phase Constituent content of metals by automatic image analysis (0 ÷ 100 %) – ASTM E562-11 + ASTM E1245-03(2016)
  • Determining volume fraction by systematic manual point count (0 ÷ 100 %) – ASTM E562-11
  • Microscopic and macroscopic examination on welded joints – UNI EN ISO 17639:2019; ASME IX-19 QW-183, QW-184, QW-193.1.3
  • Hardness test on welded joints – UNI EN ISO 9015-1:2011; UNI EN ISO 6507-1:2018
  • Bend test on welded joints – UNI EN ISO 5173:2012; ASTM A370-19, ASME IX-19 QW-160
  • Charpy test on welded joints – UNI EN ISO 9016:2012; ASME IX-19 QW-171; UNI EN ISO 148-1:2016
  • Longitudinal tensile test on welded joints – UNI EN ISO 5178:2019; UNI EN ISO 6892-1:2016
  • Transversal tensile test on welded joints – UNI EN ISO 4136:2012; ASME IX-19 QW-150; UNI EN ISO 6892-1:2016; ASTM E8/E8M-16a

 

References:

ASTM E415 – https://www.astm.org/Standards/E415.htm

ASTM A262 – https://www.astm.org/Standards/A262.htm

ISO 3651-1 – https://www.iso.org/standard/9096.html

ISO 3651-2 – https://www.iso.org/standard/9098.html

ASTM E1086 – https://www.astm.org/Standards/E1086.htm

ASTM A923 – https://www.astm.org/Standards/A923.htm

ASTM G48 – https://www.astm.org/Standards/G48.htm

ASTM G28 – https://www.astm.org/Standards/G28.htm

ISO 4967 – https://www.iso.org/standard/63156.html

ASTM E45 – https://www.astm.org/Standards/E45.htm

ISO 643 – https://www.iso.org/standard/61697.html

ASTM E112 – https://www.astm.org/Standards/E112.htm

ASTM A604/A604M – https://www.astm.org/Standards/A604.htm

ASTM E340 – https://www.astm.org/Standards/E340.htm

ASTM E381 – https://www.astm.org/Standards/E381.htm

UNI 3138 – http://store.uni.com/catalogo/uni-3138-1984

UNI 3137 – http://store.uni.com/catalogo/uni-3137-1965

ASTM E3 – https://www.astm.org/Standards/E3.htm

ISO 6506-1 – https://www.iso.org/standard/59671.html

ASTM E10 – https://www.astm.org/Standards/E10.htm

ASTM A370 – https://www.astm.org/Standards/A370.htm

ISO 6508-1 – https://www.iso.org/standard/70460.html

ASTM E18 – https://www.astm.org/Standards/E18.htm

ISO 6507-1 – https://www.iso.org/standard/64065.html

ASTM E92 – https://www.astm.org/Standards/E92.htm

ISO 7438 – https://www.iso.org/standard/67980.html

ASTM E290 – https://www.astm.org/Standards/E290.htm

ISO 148-1 – https://www.iso.org/standard/63802.html

ASTM E23 – https://www.astm.org/Standards/E23.htm

ISO 6892-1 – https://www.iso.org/standard/61856.html

ASTM E8/E8M – https://www.astm.org/Standards/E8.htm

ASTM E21 – https://www.astm.org/Standards/E21.htm

ISO 6892-2 – https://www.iso.org/standard/72571.html

ASTM E562 – https://www.astm.org/Standards/E562.htm

ASTM E1245 – https://www.astm.org/Standards/E1245.htm

ISO 17639 – https://www.iso.org/standard/29973.html

ASME IX – https://www.asme.org/codes-standards/find-codes-standards/bpvc-ix-bpvc-section-ix-welding-brazing-fusing-qualifications

ISO 9015 – https://www.iso.org/standard/32821.html

ISO 5173 – https://www.iso.org/standard/44748.html

ISO 9016 – https://www.iso.org/standard/62318.html

ISO 5178 – https://www.iso.org/standard/75738.html

ISO 4136 – https://www.iso.org/standard/62317.html